features
sata iii interface
extremely low power consumption
ismart disk health monitoring
intelligent error recovery system
excellent data transfer speed
hardware write protect
enhanced power cycling management
overview
the innodisk cfast 3me operates at sata iii 6.0 gb/s, which offers data transfer rate of read up to 310mb/sec. and of sequential write up to 150mb/s. compliant with cfast 2.0 standard, it is designed with 7+17 pin connector and is sata compatible. due to the idle power saving, it reduces 35% power consumption. cfast 3me is featured as small form factor, and suitable for most industrial application.
cfast 3me can work under harsh environment, and complies with ata protocol. without additional drives, the disk can be configured as a boot device or data storage device. cfast 3me support hardware write protect to prevent modification of valuable data on a device. besides, through innodisk's enhanced power cycling technology and more capacitors, cfast 3me prevents data loss caused by sudden power failure. by using innodsik's ismart, users can not only monitor the operation status of ssd, but also visualize wear-leveling status with graphics.
specifications
availability
model name cfast 3me
interface sata iii 6.0 gb/s
type standard
flash type mlc
connector 7pin+17pin
capacity 4gb~128gb
max. channels 2
sequential r/w (mb/sec, max.) 310 / 150
max. power consumption 1.1w
thermal sensor st- optional / wt- default
h/w write protect y
s.m.a.r.t. y
dimension (wxlxh/mm) 42.8 x 36.4 x 3.6 mm
vibration 20g@7~2000hz
shock 1500g@0.5ms
mtbf >3 million hours
storage temperature -55°c ~ +95°c
operation temperature standard grade: 0°c ~ +70°c;
industrial grade: -40°c ~ +85°c
深圳市联合宇光科技有限公司
13410795320
中国 深圳